bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
1 RA Removing And Installing, Sealing_replacing Timing Case Cover At Bottom (M47)|Page 587 > < 1 RA Removing And Installing, Sealing_replacing Timing Case Cover At Bottom (M47)

3 Series E46 320d (M47) SAL

Page 2
background image

If necessary, unfasten bearing pin on timing case cover with
special tool 11 2 360.

Installation:

Replace sealing ring.

Tightening Torque,

refer to Technical Data 11 14 3AZ.

Unfasten screws and remove timing case cover.

Installation:

Check adapter sleeves (1) for damage and correct
installation position.

Installation:

Seals for timing case cover and oil pump can only be obtained
as a paired set.

When carrying out repairs on timing case cover, cut seal at
marked points.

RA  Removing and installing, sealing/replacing timing case cover at bottom (M47)

BMW AG - TIS

12.02.2013  12:51

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

1 RA Removing And Installing, Sealing_replacing Timing Case Cover At Bottom (M47)|Page 587 > < 1 RA Removing And Installing, Sealing_replacing Timing Case Cover At Bottom (M47)