3 Series E46 320d (M47) SAL
11 21 571
Replacing deep-groove ball bearing in
crankshaft (M47 / M47TU / M57)
Special tools required:
•
00 5 500
•
11 2 340
•
11 2 350
(clutch removed)
Remove guide bearing with special tool 11 2 340 .
Install new guide bearing.
Drive in bearing with special tool 11 2 350 in conjunction with
special tool 00 5 500 as far as it will go.
RA Replacing deep-groove ball bearing in crankshaft (M47 / M47TU / M57)
BMW AG - TIS
12.02.2013 12:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
