3 Series E46 320d (M47) SAL
Note:
Before removing pistons, remove carbon deposits from
cylinder walls.
Remove connecting-rod cover.
Remove connecting rods with pistons from cylinder head end.
Lift out retaining ring and press out piston pin.
Caution!
Piston and piston bolts are paired and must not be fitted
individually.
Installation:
Installation of all pistons is described separately from removal.
The assembly sequence for removal and installation is different.
RA Removing and installing or replacing all pistons (M47)
BMW AG - TIS
12.02.2013 12:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
