3 Series E46 320d (M47) SAL
Press in clamping piston at bottom and remove special
tool 11 3 340 (alignment pin).
Fit vibration damper (1) and tighten central bolt (2) by hand.
Tighten chain wheel nut (3) to initial torque of 18 Nm.
Slacken blocking screw (1).
Install spacer plate (2) and tighten down blocking screw (1).
Tightening Torque,
refer to Technical Data 13 51 14AZ.
RA Replacing both timing chains (M47)
BMW AG - TIS
12.02.2013 13:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -