3 Series E46 320d (M47) SAL
Fit special tool 11 6 320 to exhaust camshaft.
Note:
Special tool 11 6 320 must lie flush on cylinder head.
Remove special tool 11 6 320 from exhaust camshaft.
Remove special tool 11 2 300.
Install plug in alignment bore.
Assemble engine.
RA Adjusting camshaft timing (M47)
BMW AG - TIS
12.02.2013 13:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
