3 Series E46 320d (M47) SAL
Replace sealing rings and coat with oil.
Pull out oil filter element (1) and replace.
Note:
Press oil filter element (1) onto fixture in oil filter housing.
Fit main flow oil filter cover and tighten down.
Tightening torque, 11 42 2AZ.
E46 only:
Unclip hoses.
Remove hose holder (1).
RA Removing and installing/sealing or replacing oil-water heat exchanger (M47)
BMW AG - TIS
12.02.2013 13:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -