3 Series E46 320d (M47) SAL
Unclip hoses, remove hose holder (1).
Detach rubber strip (1).
Release locks (2) and remove side trim panel.
Release screws, remove left acoustic cover.
Installation:
Check rubber grommet for accommodating left acoustic cover
in oil filter housing, replace if necessary.
Guide pins of left acoustic cover must be joined in rubber
grommet on oil filter housing and in bore of rear acoustic
cover.
RA Removing and installing intake air manifold (M47)
BMW AG - TIS
12.02.2013 13:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -