3 Series E46 320d (M47) SAL
Unfasten exhaust turbocharger.
Installation:
Replace seal.
Coat screw threads with copper paste -CRC-.
Tightening torque, 11 65 1AZ.
Detach pipe for exhaust recuperation from exhaust manifold.
Release nuts (1), remove exhaust manifold.
Installation:
Replace seals.
Note arrangement of heat-protection plates and seals; tab
washers face outwards.
Coat stud bolt threads with copper paste -CRC-.
Replace nuts.
Tightening sequence from inside to outside!
Tightening torque, 11 62 1AZ.
RA Removing and installing, sealing/replacing exhaust manifold (M47)
BMW AG - TIS
12.02.2013 13:13
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -