3 Series E46 320d (M47) SAL
Connect special tool 13 5 290 and 13 5 272 and attach to
pressure sensor (up to 3.5 bar) of DIS tester (2).
Connect special tool 13 5 290 to connecting piece of fuel feed
line (coming from injection pump) and to fuel filter (1).
To check fuel pressure, slide fuel filter (1) back into bracket so that
it is vertical.
Start engine and read off specified value at idle speed.
Specified value for fuel delivery pressure from fuel pump, or to
injection pump,
refer to Technical Data.
Inspection procedure for all models:
Increase engine speed to 4000 rpm and observe pressure at
tester.
The delivery pressure must drop considerably at higher engine
speed due to the suction effect of the injection pump.
Brief vacuum is permitted.
Caution!
When removing pipe adapter, catch fuel in a suitable
container.
RA Checking fuel delivery pressure (M47)
BMW AG - TIS
12.02.2013 13:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
