3 Series E46 320d (M47) SAL
13 62 600
Replacing speed sensor (pulse generator)
(M47)
Follow instructions for disconnecting and connecting battery,
refer to General Information in MG 12.
Disconnect and cover battery negative lead.
Remove engine underguard.
Remove and install starter motor,
refer to 12 41 020.
Lever out expansion rivets and lift off intake hood (1).
Push radiator hose (1) to one side and look past deflection pulley
(2) at vibration damper.
Rotate crankshaft in direction of engine rotation until notch in
vibration damper (1) is flush with cast lug on timing case cover (2).
RA Replacing speed sensor (pulse generator) (M47)
BMW AG - TIS
12.02.2013 13:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -