bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

17 Cooling System (M47) > < 3 RA Removing And Installing_replacing Fuel Pump (complete Sensor Unit)
Page 1
background image

16 14 530

Replacing sucking jet pump

Suck the fuel out of the fuel tank,

refer to 16 00 005

Remove fuel level sensor (right),

refer to 16 12 000

Remove fuel level sensor (left),

refer to 16 12 001

Left side:

Pull tank expansion line (1) on fuel baffle (2) out of locking fixture.

Installation:

Ensure that tank expansion line is perfectly connected in fuel
baffle.

Right side:

Remove tank expansion line from fuel tank.

Installation:

Tank expansion line must not be bent when it is being
removed.

Installation:

Ensure that non-return valve (1) is fitted in tank expansion
line.

RA  Replacing sucking jet pump

BMW AG - TIS

12.02.2013  14:05

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

17 Cooling System (M47) > < 3 RA Removing And Installing_replacing Fuel Pump (complete Sensor Unit)