bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

3 RA Removing And Installing_replacing Heater > < 1 RA Installing Servodrive
Page 1
background image

64 11 ...

Removing and installing/replacing air duct for
right footwell

Remove right glovebox.

Remove insert in front of glovebox and trim below glovebox.

Remove heating controls.

Version with on-board monitor only:

Remove complete on-board monitor.

Note:

Air duct for right footwell (1) is clipped onto housing of heater -
A/C unit.

Unlock air duct for right footwell (1) through opening of heater -
A/C controls or on-board monitor.

Installation:

Opening (2) for lock must not be damaged.

Lift unlocked air duct for right footwell (1) upwards out of rear
compartment air duct and feed out to front right.

RA  Removing and installing/replacing air duct for right footwell

BMW AG - TIS

13.02.2013  01:11

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

3 RA Removing And Installing_replacing Heater > < 1 RA Installing Servodrive