3 Series E46 320d (M47) SAL
Disconnect plug connections (4).
Replacement only:
Unscrew nut (1).
Pull control unit (2) in direction of arrow out of guide (3) and
remove.
Installation:
Pay attention to cable guide.
touring:
Slacken panel for trunk floor plate at front.
Note:
For purposes of clarity: Illustration shows trunk floor removed.
Loosen nut (1). Unscrew nut (2).
Unfasten plug connection.
Raise control unit and remove.
compact:
Remove side panel cover.
Disconnect plug connections (1).
Unscrew nuts (2).
Lift out control unit (3).
RA Removing and installing/replacing control unit (Park Distance Control)
BMW AG - TIS
13.02.2013 02:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -