bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 SI Cracking Noise When Pulling Away E46 M47 Manual Transmission|Page 121 > < 3 SI Muffled Knock From The Area Of The Rear Axle During Load Reversal E46 323iA And|Page 118
Page 1
background image

VS-21/Meyer

Baugruppe/Group: 26

26 01 00 (652)

weltweit außer
USA, Kanada
und Japan

Datum/Date:
01/2001

Cracking noise when pulling away

E46 / M47 Manual transmission

Complaint:

Cracking noises from the propeller shaft when pulling away. The noise occurs primarily
when pulling away for the first time following a change of direction (forward/reverse).

Cause:

Relative movement between the inner race of the centre bearing to the hub of the propeller
shaft fork, snapping noise.

Affected
vehicles:

E46/E47 320d manual transmission 
Manufacturing period: from start of series production to April 2001.

Remedy:

Retrofit dust cover to rear centre bearing.

Procedure:

In case of customer complaint, remove the propeller shaft as described in Repair
Instructions 26 11 000 .

Fig. 1

Important:

Clamp the propeller shaft in a vice only by the circumference edge (1) of the fork
of the universal joint, see Fig. 1. In any other position it will be damaged. Use
protective jaw inserts when clamping.

Fig. 2

SI  Cracking noise when pulling away E46 M47 Manual transmission

BMW AG - TIS

12.02.2013  10:28

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 SI Cracking Noise When Pulling Away E46 M47 Manual Transmission|Page 121 > < 3 SI Muffled Knock From The Area Of The Rear Axle During Load Reversal E46 323iA And|Page 118