bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing Cylinder Head (M47)|Page 555 > < 1 RA Removing And Installing_sealing Cylinder Head Cover (M47)|Page 553
Page 1
background image

11 12 100

Removing and installing cylinder head (M47)

Remove battery cover.

Follow instructions for disconnecting and connecting
battery,

refer to General Information MG 12.

Disconnect negative lead from battery.

Caution!

When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.

Cover alternator with suitable materials.

Failure to comply with this procedure may result in an alternator
malfunction.

Disconnect intake air manifold,

refer to 11 61 050.

Remove injection nozzles,

refer to 13 53 320.

Remove cylinder head cover,

refer to 11 12 000.

Unfasten exhaust turbocharger from exhaust manifold.

Installation:

Replace seal.

Coat thread with copper paste -CRC-.

Tightening Torque,

refer to Technical Data 11 65 1AZ.

RA  Removing and installing cylinder head (M47)

BMW AG - TIS

12.02.2013  12:50

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing Cylinder Head (M47)|Page 555 > < 1 RA Removing And Installing_sealing Cylinder Head Cover (M47)|Page 553