3 Series E46 320d (M47) TOUR
Tighten down screws (1 and 2).
Raise engine approx. 5 mm with special tool 00 0 200 .
Release screws.
Remove acoustic cover on left.
Installation:
Check rubber grommet for guiding left acoustic cover in oil filter
housing, replace if necessary.
Insert guide pins of left acoustic cover:
•
into rubber grommet on oil filter housing
•
into bore of acoustic cover at rear
RA Removing and installing, sealing or replacing oil sump (M47)
BMW AG - TIS
12.02.2013 12:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -