3 Series E46 320d (M47) TOUR
Install pistons with arrows pointing towards camshaft drive.
The entire circumference of the tightening strap must be flush with
the crankcase.
Caution!
Danger of piston ring failure.
Only press pistons into place with finger force - do not knock in!
Attach crankpin to connecting rod.
Apply light coat of oil to connecting-rod bearing shells.
Place bearing caps in position, making sure that matching
numbers are paired.
Install new connecting-rod screws.
Tighten down conrod screws with special tool 00 9 120 or
special tool 11 2 110.
Tightening torque,
refer to Technical Data 11 24 1AZ.
RA Removing and installing or replacing all pistons (M47)
BMW AG - TIS
12.02.2013 13:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
