3 Series E46 320d (M47) TOUR
Tighten down screws (1 and 2).
Raise engine approx. 5 mm with special tool 00 0 200 .
-
Release nut on left engine mount.
-
Release support bracket between timing case cover and
main flow oil filter.
-
Release guide tube for oil dipstick from timing case cover.
-
Remove plug from oil pressure switch.
-
Remove main flow oil filter housing from engine block (four
screws).
Installation:
Clean sealing surface on engine block.
RA Removing and installing/sealing or replacing complete main flow oil filter (M47)
BMW AG - TIS
12.02.2013 13:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
