3 Series E46 320d (M47) TOUR
12 14 . . .
Relay assignment, engine wiring harness
(M47, M57)
Read fault memory of DDE control unit.
Switch off ignition.
Note:
Installation location of relays is in electronics box in direction
of travel, left.
Release screws (1).
Installation:
Tightening torque,
refer to Technical Data 12 90 4AZ .
Remove cover from electronics box.
(1)
DDE main relay
(2)
Wiper relay
Remove glow plug relay,
refer to 12 21 500 .
Note:
Read out fault memory of DDE control unit (DDE = Digital
Diesel Electronics).
Check stored fault messages.
Rectify faults.
Now clear the fault memory.
RA Relay assignment, engine wiring harness (M47, M57)
BMW AG - TIS
12.02.2013 13:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -