bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Removing And Installing Or Replacing Glow Plug Relay (M47, M57)|Page 733 > < 4 RA Note On Replacing Codable_programmable Control Units
Page 1
background image

12 21 500

Removing and installing or replacing glow
plug relay (M47, M57)

Turn off ignition.

Follow instructions for disconnecting and connecting battery,

refer to General Information MG 12.

Disconnect battery negative lead from battery and lay to one side.

If malfunctions have occurred on the glow plugs, it is necessary to
check the fuse behind the glovebox.

Installation location of relay for glow plugs:

In electronics box in direction of travel on left.

Release screws (1).

Installation:

Tightening torque,

refer to Technical Data 12 90 4AZ.

Remove cover from electronics box.

Disconnect plug connection (1).

Unlock glow plug relay (2) with a screwdriver (3) and remove
towards top.

RA  Removing and installing or replacing glow plug relay (M47, M57)

BMW AG - TIS

12.02.2013  13:33

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Removing And Installing Or Replacing Glow Plug Relay (M47, M57)|Page 733 > < 4 RA Note On Replacing Codable_programmable Control Units