3 Series E46 320d (M47) TOUR
13 51 000
Removing and installing/replacing injection
pump (M47)
Connect DIS or MoDiC to diagnosis socket. Select
diagnostic program of DDE control unit.
Read fault memory of DDE control unit. Switch off ignition.
Caution!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator
malfunction.
Follow instructions for disconnecting and connecting battery,
refer to General Information MG 12.
Disconnect and cover battery negative lead.
Remove engine underguard.
Remove radiator blind,
refer to 17 11 020.
Disconnect plug connections at pressure converter for variable
turbine geometry (1) and at air-mass flow sensor (2).
RA Removing and installing/replacing injection pump (M47)
BMW AG - TIS
12.02.2013 13:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
