3 Series E46 320d (M47) TOUR
Release union nuts on injector nozzles, cylinders 3 and 4, with
special tool 13 5 020.
Note:
Adjust position of special tool at early stage to prevent any
bending of injection lines.
Plug openings with caps.
Installation:
Tightening torque,
refer to Technical Data 13 53 7AZ.
Release screw (1) on connecting bridge.
Remove cable channel from retainer and lay to one side.
Release union nuts (1) on injection lines of cylinders 3 and 4.
Disconnect rear injection lines.
Note:
Plug openings with caps.
Installation:
Tightening torque,
refer to Technical Data 13 53 2AZ.
Disconnect plug connection (1).
Remove temperature sensor (2).
Tightening torque,
refer to Technical Data 13 62 6AZ.
RA Replacing coolant temperature sensor (M47)
BMW AG - TIS
12.02.2013 13:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -