3 Series E46 320d (M47) TOUR
13 62 560
Removing and installing/replacing air-mass
flow sensor (M47)
Turn off ignition.
Release expansion rivets (1). Push cover approx. 2 cm towards
rear and lift out towards top.
Note:
Screw (1) is not visible.
Release screws (1 and 2) and remove front acoustic cover.
Release screws (1) and detach intake neck.
Tightening Torque,
refer to Technical Data 13 62 8AZ.
RA Removing and installing/replacing air-mass flow sensor (M47)
BMW AG - TIS
12.02.2013 13:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
