3 Series E46 320d (M47) TOUR
Remove dust cover (1).
Install special tool 00 7 500 between center mount (1) and
universal joint (2).
Using a hydraulic press, force center mount (1) off propeller shaft
(2).
Using special tool 23 1 160, press deep-groove ball bearing out
of center mount (1).
RA Replacing deep-groove ball bearing in propeller shaft center mount (three-part p
BMW AG - TIS
12.02.2013 16:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -