3 Series E46 320d (M47) TOUR
Slide special tool 32 3 040 into steering angle sensor. The link
must rest in an opening in the steering angle sensor.
Push in steering spindle upper section up to stop.
Locate special tool 32 3 040 with steering angle sensor. Both
lugs (1) of special tool must engage in openings of bearing (2).
Push on steering angle sensor.
Important!
Locking element (1) must be inserted in holder of steering
angle sensor.
Both locking hooks (2) must be snapped into place.
RA Removing and installing/replacing steering angle sensor
BMW AG - TIS
12.02.2013 17:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
