3 Series E46 320d (M47) TOUR
Installation:
If necessary, replace faulty pins (1) of decorative strip (2).
Model with real wood:
Installation:
If necessary, replace faulty screw-in pins (1) on decorative strip
(2).
Tightening torque, 51 16 8AZ.
If necessary, ensure screws (3) are properly seated.
Installation:
Slide decorative strip (1) with guides (2) into handle recess (3) and
then clip into place.
Installation:
If necessary, replace faulty grommets (1) on door trim panel (2).
RA Replacing a clipped-in trim (decorative strip on front or rear door) (saloon/sed
BMW AG - TIS
12.02.2013 21:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -