3 Series E46 320d (M47TU) SAL
Align exhaust camshaft.
Note:
Special tool 11 6 320 must rest without a gap on cylinder
head.
Secure exhaust camshaft with special tool 11 6 320 .
Note:
When tightening down camshaft screw connection, grip
exhaust camshaft at hexagon head.
Tighten down exhaust-side gear wheel with special tool
00 9 120 .
Tightening torque, 11 31 4AZ .
Remove special tool 11 6 320 from exhaust camshaft.
Pull special tool 11 2 300 back until flywheel is no longer
secured in position.
RA Adjusting camshaft timing (M47TU)
BMW AG - TIS
12.02.2013 13:23
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -