3 Series E46 320d (M47TU) SAL
Release screws (1).
Caution!
To avoid damaging the threads and prevent turbocharger
leakage, insert screws (1) in 1/2 turns simultaneously.
Installation:
Apply a thin coat of copper paste (CRC) to screw (1) threads,
Tightening torque, 11 65 1AZ .
Release clamp (1) and detach oil return hose from crankcase.
Release screws (2).
Remove turbocharger towards bottom.
Note:
Illustration similar.
Release screw on oil pressure line (1).
Tightening torque, 11 65 7AZ .
Installation:
-
Replace seals.
-
Oil pressure line (1) must be installed parallel to
turbocharger housing.
Convert oil pressure line (1) to new turbocharger.
Installation:
-
Replace all gaskets.
-
Clean sealing faces on exhaust manifold.
RA Removing and installing or replacing exhaust turbocharger (M47TU)
BMW AG - TIS
12.02.2013 13:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -