3 Series E46 320d (M47TU) SAL
Release screws.
Remove vacuum pump.
Note:
Screw threads are coated with sealing compound.
Replace screws or apply Drei Bond 1209 sealing compound
(refer to BMW Parts Service).
Installation:
Replace O-ring (1) and apply a thin coat of anti-friction agent.
Align driver (2) of vacuum pump to opening on camshaft
gear.
Note:
The screw on the camshaft gear has a nozzle for lubricating
the vacuum pump.
Assemble engine.
Check vacuum system for leaks.
RA Removing and installing or replacing vacuum pump (M47TU / M47T2 / M57TU / M57T2)
BMW AG - TIS
12.02.2013 13:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -