3 Series E46 320d (M47TU) SAL
12 32 501
Replacing regulator switch for alternator
(M47TU)
Instructions for disconnecting and connecting battery.
Disconnect battery negative lead on battery side and cover.
Alternator removed.
Remove and install alternator.
Valeo alternator:
The cover is engaged at three points (1).
Carefully insert a screwdriver between cover and alternator.
Lift out cover.
Pull off cover cap (2).
Release nuts (arrow).
If necessary, remove sealing compound in area (1).
Release contact screws underneath.
Remove regulator.
Check contact faces (1) of slip rings for wear and recondition if
necessary.
RA Replacing regulator switch for alternator (M47TU)
BMW AG - TIS
12.02.2013 13:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -