3 Series E46 320d (M47TU) SAL
Draining coolant:
Remove cap (1) on expansion tank.
Remove front underbody protection.
Grip adjusting screw (2) and undo drain plug (1) on radiator at
bottom.
Drain, catch and dispose of coolant.
Installation:
Replace sealing ring.
Observe Tightening Torque,
refer to 17 11 2AZ.
Undo drain plug (1) on exhaust side of engine block.
Drain, catch and dispose of coolant.
Installation:
Replace sealing ring.
Observe Tightening Torque,
refer to 11 11 5AZ.
Adding coolant:
Slacken vent plug (1) on radiator feed.
RA Draining and adding coolant (M47, M47TU)
BMW AG - TIS
12.02.2013 14:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
