3 Series E46 320d (M47TU) SAL
Remove heat shield (1).
E39:
-
Unscrew screws (1).
-
Remove reinforcement carrier (2)
Unflange propeller shaft from transmission and tie up to one side.
Support transmission with a workshop hoist.
Unfasten screws and remove cross member.
Tightening torque: 23 71 2AZ
.
RA Replacing radial seal for output flange (GS5-39DZ)
BMW AG - TIS
12.02.2013 15:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
