3 Series E46 320d (M47TU) SAL
Pull support member (1) slightly out of center console.
Depending on equipment, press fitted switches (2) forwards out of
support member (1) and disconnect.
On rear side of support member (1), disconnect cable plug from
cigarette lighter and ashtray light.
Remove support member (1).
Detach cable plug from fixture and disconnect.
Release screws.
Tightening torque, 25 16 3AZ.
Lift shift tower (1) and remove acoustic insulation (4) towards
bottom.
Lever out locking clip (3).
Withdraw shiftlock solenoid (2) from shift tower (1).
Installation:
The shiftlock solenoid (1) is secured against turning by a flat
area on the front journal.
RA Removing and installing/replacing shiftlock solenoid
BMW AG - TIS
12.02.2013 16:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -