3 Series E46 320d (M47TU) SAL
34 41 000
Removing and installing/replacing handbrake
lever
Special tools required:
•
00 2 222
Remove storage tray.
If necessary, remove center armrest.
Installation:
Adjust handbrake after completing work.
Follow adjustment instructions.
Disconnect lines to handbrake indicator switch.
Release adjustment nuts with special tool 00 2 222 and screw
down fully from Bowden cables.
Installation:
Use new screws.
Release screws (1 and 2).
Remove handbrake lever.
RA Removing and installing/replacing handbrake lever
BMW AG - TIS
12.02.2013 18:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -