3 Series E46 320d (M47TU) SAL
34 51 527
Removing and installing/replacing DSC
hydraulic unit
Note:
Note "General Data",
refer to 34 00 ...
After completing work, carry out function check on DSC unit,
refer to BMW Diagnosis Information System (DIS).
After completing work, bleed brake system,
refer to 34 00 050.
Detach lines, seal connection bores with plugs.
V)
from THZ circuit V to DSC unit circuit V (front axle circuit)
H)
from THZ circuit H to DSC unit circuit H (rear axle circuit)
FR) from DSC unit VR to wheel brake front right
FL) from DSC unit VL to wheel brake front left
HR) from DSC unit HR to wheel brake rear right
HL) from DSC unit HL to wheel brake rear left
Installation:
Observe Tightening Torque,
refer to 34 32 1AZ.
Unfasten plug connection (2) and disconnect.
Release screw and feed out DSC unit towards top.
RA Removing and installing/replacing DSC hydraulic unit
BMW AG - TIS
12.02.2013 18:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -