3 Series E46 320d (M47TU) SAL
Drill holes for plug welding reinforcement plate, inside B-pillar, in
spare part.
Drill holes for plug welding inside B-pillar in cover for side
member.
Clean connection faces on body and spare part and coat with zinc
dust paint.
Fit inside B-pillar spare part and locate in position.
Gap between seatbelt height adjustment fixtures (A) = 173 mm.
To fit, install seatbelt height adjustment fixture.
RA Replacing cover for side member, left or right (partial replacement, B-pillar be
BMW AG - TIS
12.02.2013 20:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 16 -