3 Series E46 320d (M47TU) SAL
Grind down welded surfaces.
Note:
Do not grind down welding seam thin in area of contact
surface of seatbelt height adjustment fixture.
Seatbelt height adjustment fixture must rest flat.
Install metal cutout, "window", of B-pillar, outside, secure in
position and weld up.
Grind down welded surfaces.
Tin out and grind down contact surfaces.
Coat connection face of cover for front side member with tin and
grind down.
Coat connection face of cover for rear side member with tin and
grind down.
RA Replacing cover for side member, left or right (partial replacement, B-pillar be
BMW AG - TIS
12.02.2013 20:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 18 -