3 Series E46 320d (M47TU) SAL
Release screws (1) and (2) on C-pillar.
Note:
After slackening, the closing bar should be positioned approx.
90
°
to the door frame inside edge (3) and should be able to
be moved easily.
Lower rear door window.
Slacken nuts on door hinges, top and bottom.
Adjust gap (A) uniformly,
refer to Windows and door seams 41 00 ...
Adjust gap and plane displacement (B) uniformly,
refer to Gap measurements, doors/hood and rear lid 41 00 ...
Hand-tighten nuts on door hinges, top and bottom.
Check that rear door is flush with body in terms of height and
correct if necessary.
RA Adjusting left or right rear door
BMW AG - TIS
12.02.2013 20:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -