3 Series E46 320d (M47TU) SAL
51 13 280
Removing and installing trim strip on roof
frame at left or right
Lever out trim strip (1) with special tool 00 9 321 at rear and
unclip the rest.
If necessary, replace faulty clips (1) or seals (2) on trim strip (3).
Installation:
Slide trim strip (1) at front into seal (2),
clip in at front and rear so it is flush with edge (3)
and then clip in the rest.
RA Removing and installing trim strip on roof frame at left or right
BMW AG - TIS
12.02.2013 20:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -