3 Series E46 320d (M47TU) SAL
Insert outside handle (1) and snap towards front into place
(audible click).
Installation:
Lever out sealing cap (1).
Tighten down adjusting screw (2) on door lock and fit sealing
cap (1).
Tightening torque, 51 22 4AZ.
Direction of rotation of adjustment screw (2):
Left rear door
Right rear door
Tighten down adjusting
screw (2) in clockwise
direction, as shown in
illustration.
Tighten down adjusting
screw (2) in
counterclockwise direction.
Caution!
Carry out function check only with door open.
If door is closed
and the setting at the rotary striker lock is incorrect,
door cannot be opened any more
and the door trim panel must be destroyed.
RA Removing and installing/replacing outside handle on left or right rear door (up
BMW AG - TIS
12.02.2013 21:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -