Removing And Installing Rear Lid Lock for 3 Series E46 320d (M47TU) SAL
51 24 100
Removing and installing/replacing rear lid
lock (upper section)
Remove panel for rear lid.
Convertible only:
Remove additional brake light.
Unclip plug connection (1) in direction of arrow from cover
fastener and disconnect.
Loosen screws (2).
Unclip cover fastener (3) in direction of arrow.
Installation:
Ensure retaining lugs (1) are correctly seated.
Place Bowden cable (2) in mount (3).
Feed plug (4) as illustrated through opening.
Ensure catches (5) are correctly seated.
Unfasten plug connection (1).
Release screws (2) and feed out upper section of rear lid lock (3).
Installation:
Use thread-tapping screws.
RA Removing and installing/replacing rear lid lock (upper section)
BMW AG - TIS
12.02.2013 21:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -