3 Series E46 320d (M47TU) SAL
E38 from 9/98; replacement of drive unit
E39 from 3/98
E46 Compact
E46 Saloon, Touring, Coupé from 09/2001; initial equipment of
drive unit
E46 Saloon, Touring, Coupé; replacement of drive unit
E53 slide/tilt sunroof (not: panoramic glass sunroof):
The curve is learnt manually in the following steps:
•
Release switch after normalization for max. 5 seconds.
•
Then hold down the switch in the raising position direction
until such time that the slide/tilt sunroof has returned to the
closed position after a complete opening movement.
•
This concludes learning of the curve. The switch can now be
released.
Note:
Carry out function check (one-touch function, anti-trapping
protection and, if necessary, comfort function).
E38 up to 9/98; initial equipment and replacement of drive unit
E39 up to 3/98:
In these cars, the curve is learnt automatically during operation by
way of the module.
After normalization, open and close slide/tilt sunroof fully once by
pressing switch.
In the event of faulty triggering of the anti-trap protection facility in
specific positions, the fault can be rectified by moving over the
relevant position numerous times.
E38 from 9/98; initial equipment of drive unit
E46 Saloon, Touring, Coupé up to 09/2001; initial equipment of
drive unit:
The curve is determined by means of coding.
RA Notes on steel and glass slide/tilt sunroofs (initialization/normalization/learn
BMW AG - TIS
12.02.2013 23:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -