3 Series E46 320d (M47TU) SAL
67 31 521
Removing and installing/replacing drive for
seat height adjustment (front seat removed)
Saloon/sedan, coupé, touring:
Disconnect plug connection (2).
Note:
Secure drive for seat height adjustment (3) against falling out.
Loosen screws (1).
Remove drive for seat height adjustment (3) with fixture for plug
connection (4) in direction of arrow from flange (5).
If necessary, remove inner drive shaft from drive for seat height
adjustment (3).
Installation:
Make sure drive shaft (1) is correctly seated.
Ensure fixture for plug connection (2) and drive for seat height
adjustment (3) on flange (4) are correctly seated.
Convertible:
Disconnect plug connection (1).
Note:
Secure drive for seat height adjustment (4) against falling out.
Release screws (3).
Remove drive for seat height adjustment (4) with fixture for plug
connection (2) in direction of arrow from flange (5).
If necessary, remove inner drive shaft from drive for seat height
adjustment (4).
Installation:
Make sure drive shaft (1) is correctly seated.
Ensure fixture for plug connection (2) and drive for seat height
adjustment (4) on flange (3) are correctly seated.
RA Removing and installing/replacing drive for seat height adjustment (front seat r
BMW AG - TIS
13.02.2013 02:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -