3 Series E46 320d (M47TU) SAL
Installation:
Clean adhesive area (1) on backrest frame (2).
Installation:
Transparent hose (1) of drive unit for lumbar support must not be
kinked.
Pull off protective film (3) from jacket (2). Stick drive unit for
lumbar support to backrest frame.
If necessary, secure jacket (2) with cable strap.
RA Removing and installing/replacing lumbar support drive mechanism on front seat,
BMW AG - TIS
13.02.2013 02:49
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -