3 Series E46 320d (M47TU) SAL
Screw connection for rear left strap and middle lap belt strap:
(1) Support ring (fitted to rear left lower strap)
(2) Anchor fitting, rear left lower strap
(3) Anchor fitting, middle lap belt strap
Installation:
Lug of support ring (1) must snap into opening in anchor fitting
of rear left lower strap (2) and engage in groove of anchor
fitting (3).
Release retaining screw (1) of right top belt.
Installation:
Contact surface (3) of anchor fitting (4) rests against inside of
wheel arch (2).
Tightening Torque for retaining screw (1),
refer to Technical Data 72 11 9AZ.
RA Removing and installing or replacing all rear seat belts (compl., with lap belt)
BMW AG - TIS
13.02.2013 03:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -