3 Series E46 320d (M47TU) SAL
Support tube for instrument panel from 07 / 98:
1.
Threaded pin for attaching ITS head airbag gas generator
2.
Bore for locating retaining pin for ITS head airbag gas
generator
Disconnect plug for ITS head airbag gas generator,
refer also to 72 12 ... Unlocking/locking airbag plug connections
Unfasten nut.
Remove ITS head airbag gas generator.
Installation:
Replace self-locking nut.
Tightening torque,
refer to Technical Data 72 12 6AZ
Gas generator as of 07 / 98:
1.
Bore for accommodating threaded pin of gas generator, ITS
head airbag, on support tube for instrument panel
2.
Locating pin on gas generator, ITS head airbag, for securing
to support tube for instrument panel
RA Removing and installing / replacing left or right ITS head airbag (model without
BMW AG - TIS
13.02.2013 03:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -