3 Series E46 320d (M47TU) TOUR
12 51 200
Replacing wiring harness section for injectors
(M47TU)
Read fault memory of DDE control unit. Switch off ignition.
Follow instructions for disconnecting and connecting battery.
Disconnect battery negative lead from battery and lay to one side.
Remove microfilter.
Open cable duct on lower section of microfilter housing (2) and
feed out cable(s).
Release screws (1), remove lower section of microfilter
housing (2) and heater bulkhead underneath.
Remove expansion rivets.
Release intake hood in direction of arrow and remove in opposite
direction together with intake snorkel.
RA Replacing wiring harness section for injectors (M47TU)
BMW AG - TIS
12.02.2013 14:09
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
