3 Series E46 320i (M52TU) SAL
Release screws (1).
Remove pulse generator (2).
Pull off connector (3).
Unfasten screws.
Take off valve body.
Tightening torque,
refer to Technical Data 24 30 1AZ.
Note:
As of February 2000, different Torx T40 screws (other width A/F)
will be fitted for clear identification of shift unit retaining screws.
Installation:
Coat O-rings (1) with automatic transmission fluid.
RA Removing and installing/replacing shift unit (A5S 325Z)
BMW AG - TIS
13.02.2013 02:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
