3 Series E46 320i (M52TU) SAL
Installation:
Push rubber gaiter (1) downwards until groove (2) is fully
exposed.
Installation:
Force rubber gaiter (2) of trim (1) downwards and attach to
selector lever (4).
Connect cable plugs (3 and 5) to trim (1) and install trim (1) in
center console.
Pull trim (1) with rubber gaiter out of center console.
Disconnect cable plugs (1 ... 2).
RA Removing and installing / replacing shift tower (Steptronic)
BMW AG - TIS
13.02.2013 02:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -