3 Series E46 320i (M52TU) TOUR
Detach vacuum hose (1) from pressure regulator.
Caution!
Catch and dispose of escaping fuel.
Release hose clamps (2-5) and disconnect fuel hoses.
Installation:
Replace hose clamps and fuel hoses.
Disconnect plug connection (1).
Release nuts (1) and remove 3/2-way valve.
Installation:
Read out fault memory of DME control module, check stored
fault messages, rectify faults, cancel fault memory.
RA Removing and installing/replacing 3/2-way valve (M52TU)
BMW AG - TIS
13.02.2013 00:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
